Skip to Main Content

FAQ

Page Heading Image

FAQ Categories

General FAQs

Spiralweld Pipe

Questions & Answers

General FAQs

What are typical lead times?

Normally two to three weeks on pipe orders, three to four weeks for fittings, five to six weeks if coatings or linings are required.  We normally have pipe in stock from 6" to 20"

back to top

Does Naylor Pipe have a minimum order quantity?

No.  An advantage to the spiralweld process is its relatively quick set up time and low set up scrap production.  We may not be running your required size, but if we are running a similar size we can tie in your requirement with that similar run.

back to top

Does Naylor manufacture elbows, and other fittings?

Yes.  We fabricate elbows, tees, wyes, and reducers in Naylor standard dimensions or your specified dimensions.  For more information see page 13 of our catalog.

back to top

What types of connections does Naylor offer?

We offer grooved ends for couplings, flanges, collars, plain ends for welding and more.  See page 12 of our catalog for more information.

back to top

What diameters can Naylor Pipe manufacture?

Naylor pipe starts at 4" I.D. and goes up to 96" O.D.  See pages 3 through 9 of our catalog.

back to top

How about special diameters?

We can manufacture any diameter from 4" I.D. to 96" O.D. to within 1/64 of an inch.

  • Example of some possible sizes. 15 1/8" O.D., 15 1/4" O.D., 15 1/2" I.D., 15 3/4" I.D., Etc.

back to top

How many wall thickness are available?

#14 Ga.  (.074"), #12 Ga.  (.104"), #10 Ga.  (.134"), #8 Ga.  (.164"), for Lockseam and any wall thickness from .134" to .500" for spiral buttweld.

back to top

What lengths are available?

We offer exact lengths to your specifications.  20'-0", 40'-0", 60'-0" or any other exact cut lengths

back to top

Does Naylor offer coatings or linings?

YES, many.  See page 15 of our catalog for more information.

back to top

Can Naylor prefabricate sections per my specifications?

YES.  Send us a drawing and we will provide an estimate.

back to top

What materials are available?

We can manufacture pipe and fittings from Carbon, Abrasion-Resistant, Stainless, and Weathering Steel.

back to top

Common applications for Naylor Pipe.

Our pipe has many uses.  Air, water, piling and more.  See page 14 of our   catalog for more examples of applications.

back to top

Does Naylor offer CAD files?

Yes, most of our products are available as CAD files for assisting your company in system design. Give us a call @ 773-721-9400 for details or fill our contact form.

back to top

Is Naylor Pipe inspected or tested?

Naylor pipe is inspected as it comes off of the machine and before it ships.   We hydrostatically test our pipe in house if the specification requires.

back to top

Do you have a sales office in my area?

Naylor services all of the USA, Canada, and Mexico from our location in Chicago, Illinois. Call 773-721-9400 to speak with a salesperson or fill our contact form.

back to top

Does Naylor manufacture pipe to API specifications?

No.  We manufacture pipe to ASTM A-139, A-211, or A-252.

back to top

Spiralweld Pipe

What's the Smallest Side You Make

4 inche ID

back to top

Can't find what you are looking for?

Click here to ask your own question.
Close